Izra Electronics Pvt. Ltd.

ie125specs.jpg (7035 bytes)
Physical Parameters Mechanical Dimensions
AR : COMMON ANODE RED Face Length : 19 mm
CR : COMMON CATHODE RED Face Width : 10 mm
AG : COMMON ANODE GREEN Height : 6 mm
CG : COMMON CATHODE GREEN Pin Spacing : 2.5 mm
Row Spacing : 7.6 mm
  
  
Colour Voltage
(in V)
min   avg  max		 Current
(in mA)
  min  avg   max		 Power Diss.
(in mW)
min   avg   max		 Peak Wavelength
(in nM)		 Typical Intensity
(in mcd at 10mA)
Red
1.7 2 3
5 10 30
9 20 90

660

9
Green
1.7 2 3
5 10 30
9 20 90

570

7
 

IE A 125  AR/AG

IE A 125  AR/AG
Pin Connection Pin Connection
1 A1  Cathode 10 D2  Cathode
2 J  Cathode 11 COM  Anode
3 H  Cathode 12 DP  Cathode
4 F  Cathode 13 C  Cathode
5 G1  Cathode 14 L  Cathode
6 M  Cathode 15 G2  Cathode
7 N  Cathode 16 B  Cathode
8 E  Cathode 17 K  Cathode
9 D1  Cathode 18 A2  Cathode

ie118cathode.jpg (8669 bytes)

IE A 125  CR/CG

IE A 125  CR/CG
Pin Connection Pin Connection
1 A1  Anode 10 D2  Anode
2 J  Anode 11 COM  Anode
3 H  Anode 12 DP  Anode
4 F  Anode 13 C  Anode
5 G1  Anode 14 L  Anode
6 M  Anode 15 G2  Anode
7 N  Anode

16

 B  Anode
8 E  Anode 17 K  Anode
9 D1  Anode 18 A2  Anode

     
1. For uniform brightness, equal current (10-20 mA) must be given for all segments with 2 volts supply. Choose appropriate resistor for uniform brightness ( R= { Vs - Vf } / IF) .
2. For cleaning, IP alcohol can be used but should not be in contact with the surface for more than 1 minute.
3. Do not bend the pins after soldering. If required, it may be done before soldering only.
4. Soldering rod should be kept away from the body of the display.