Izra Electronics Pvt. Ltd.

Physical Parameters Mechanical Dimensions
AR : COMMON ANODE RED Face Length : 28 mm
CR : COMMON CATHODE RED Face Width : 20 mm
AG : COMMON ANODE GREEN Height : 8.3 mm
CG : COMMON CATHODE GREEN Pin Spacing : 2.5 mm
Row Spacing : 15.2 mm
No. of Pins : 16
  
Colour Voltage
(in V)
min   avg  max		 Current
(in mA)
  min  avg   max		 Power Diss.
(in mW)
min   avg   max		 Peak Wavelength
(in nM)		 Typical Intensity
(in mcd at 10mA)
Red
1.7 2 3
5 10 30
9 20 90

660

9
Green
1.7 2 3
5 10 30
9 20 90

570

7
 

IE 128  CR/CG

IE 128  CR/CG
Pin Connection Pin Connection
1 A  Anode 9 RDP  Anode
2 F  Anode 10 D  Anode
3 COM  Cathode 11 COM  Cathode
4 E  Anode 12 C  Anode
5 COM  Cathode 13 G  Anode
6 LDP  Anode 14 B  Anode
7 No Pin 15 No Pin
8 No Pin 16 COM  Cathode

IE 128  AR/AG

IE 128  AR/AG
Pin Connection Pin Connection
1 A  Cathode 10 RDP  Cathode
2 F  Cathode 11 D  Cathode
3 COM  Anode 12 COM  Anode
4 E  Cathode 13 C  Cathode
5 COM  Anode 14 G  Cathode
6 LDP  Cathode 15 B  Cathode
7 No Pin

16

 No Pin
8 No Pin 17 COM  Anode

     
1. For uniform brightness, equal current (10-20 mA) must be given for all segments with 2 volts supply. Choose appropriate resistor for uniform brightness ( R= { Vs - Vf } / IF) .
2. For cleaning, IP alcohol can be used but should not be in contact with the surface for more than 1 minute.
3. Do not bend the pins after soldering. If required, it may be done before soldering only.
4. Soldering rod should be kept away from the body of the display.