Izra Electronics Pvt. Ltd.

Physical Parameters Mechanical Dimensions
AR : COMMON ANODE RED Face Length : 33 mm
CR : COMMON CATHODE RED Face Width : 22.4 mm
AG : COMMON ANODE GREEN Height : 8.5 mm
CG : COMMON CATHODE GREEN Pin Spacing : 2.5 mm
Row Spacing : 15.2 mm
No. of Pins : 14
  
Colour Voltage
(in V)
min   avg  max		 Current
(in mA)
  min  avg   max		 Power Diss.
(in mW)
min   avg   max		 Peak Wavelength
(in nM)		 Typical Intensity
(in mcd at 10mA)
Red
3.4 4 6
10 20 40
34 80 240

660

9
Green
3.4 4 6
10 20 40
34 80 240

570

7
 

IE 133  AR/AG

IE 133  AR/AG
Pin Connection Pin Connection
1 A  Cathode 8 D  Cathode
2 F  Cathode 9 DP  Cathode
3 COM  Anode 10 C  Cathode
4 No Pin 11 G  Cathode
5 No Pin 12 No Pin
6 COM  Anode 13 B  Cathode
7 E  Cathode 14 COM Anode

IE 133  CR/CG

IE 133  CR/CG
Pin Connection Pin Connection
1 A  Anode 8 D  Anode
2 F  Anode 9 DP  Anode
3 COM  Cathode 10 C  Anode
4 No Pin 11 G  Anode
5 No Pin 12 No Pin
6 COM  Cathode 13 B  Anode
7 E  Anode

14

 COM  Anode

     
1. For uniform brightness, equal current (10-20 mA) must be given for all segments with 2 volts supply. Choose appropriate resistor for uniform brightness ( R= { Vs - Vf } / IF) .
2. For cleaning, IP alcohol can be used but should not be in contact with the surface for more than 1 minute.
3. Do not bend the pins after soldering. If required, it may be done before soldering only.
4. Soldering rod should be kept away from the body of the display.