Physical Parameters Mechanical Dimensions
AR : COMMON ANODE RED Face Length : 39.1 mm
CR : COMMON CATHODE RED Face Width : 22.8 mm
AG : COMMON ANODE GREEN Height : 8 mm
CG : COMMON CATHODE GREEN Pin Spacing : 2.5 mm
Row Spacing : 23 mm
No. of  Pins : 14
  
Colour Voltage
(in V)
min   avg  max		 Current
(in mA)
  min  avg   max		 Power Diss.
(in mW)
min   avg   max		 Peak Wavelength
(in nM)		 Typical Intensity
(in mcd at 10mA)
Red
1.7 2 3
5 10 30
9 20 90

660

9

Green
1.7 2 3
5 10 30
9 20 90

570

7

 

IE 157  COMMON ANODE

IE 157  COMMON ANODE

Pin Connection
1 Row 5
2 Row  7
3 Column  2
4, 11 Column 3
5, 12 Row  4
6 Column 7
7 Row 6
8 Row 3
9 Row 1
10 Column  4
13 Column 1

IE 157  COMMON CATHODE

IE 157  COMMON CATHODE

Pin Connection
1 Row 5
2 Row  7
3 Column  2
4, 11 Column 3
5, 12 Row  4
6 Column 7
7 Row 6
8 Row 3
9 Row 1
10 Column  4
13 Column 1

     
1. For uniform brightness, equal current (10-20 mA) must be given for all segments with 2 volts supply. Choose appropriate resistor for uniform brightness ( R= { Vs - Vf } / IF) .
2. For cleaning, IP alcohol can be used but should not be in contact with the surface for more than 1 minute.
3. Do not bend the pins after soldering. If required, it may be done before soldering only.
4. Soldering rod should be kept away from the body of the display.