Title.jpg (30510 bytes)

Physical Parameters Mechanical Dimensions
AR : COMMON ANODE RED Face Length : 70 mm
CR : COMMON CATHODE RED Face Width : 48 mm
AG : COMMON ANODE GREEN Height : 12 mm
CG : COMMON CATHODE GREEN Pin Spacing : 2.5 mm
Row Spacing : 60.2 mm
No. of Pins : 10
  
Colour Voltage
(in V)
min   avg  max		 Current
(in mA)
  min  avg   max		 Power Diss.
(in mW)
min   avg   max		 Peak Wavelength
(in nM)		 Typical Intensity
(in mcd at 10mA)
Red
7 8 10
10 20 60
70 160 600

660

9
Green
7 8 10
10 20 60
70 160 600

570

7
 

IE 170  AR/AG

IE 170  AR/AG
Pin Connection Pin Connection
1 COM  Anode 10 B  Cathode
2 E  Cathode 11 A  Cathode
3 D  Cathode 12 DP  Cathode
4 C  Cathode 13 F  Cathode
5 COM  Anode 14 G  Anode

IE 170  CR/CG

IE 170  CR/CG
Pin Connection Pin Connection
1 COM  Cathode 10 B  Anode
2 E  Anode 11 A  Anode
3 D  Anode 12 DP  Anode
4 C  Anode 13 F  Anode
5 COM  Cathode 14 G  Anode

     
1. For uniform brightness, equal current (10-20 mA) must be given for all segments with 7 volts supply. Choose appropriate resistor for uniform brightness ( R= { Vs - Vf } / IF) .
2. For cleaning, IP alcohol can be used but should not be in contact with the surface for more than 1 minute.
3. Do not bend the pins after soldering. If required, it may be done before soldering only.
4. Soldering rod should be kept away from the body of the display.