Title.jpg (30510 bytes)

Physical Parameters Mechanical Dimensions
R  :  RED Face Length : 25.1 mm
G :   GREEN Face Width : 10.1 mm
Height : 8 mm
Pin Spacing : 2.5 mm
Row Spacing : 7.6 mm
No. of Pins : 20
  
Colour Voltage
(in V)
min   avg  max		 Current
(in mA)
  min  avg   max		 Power Diss.
(in mW)
min   avg   max		 Peak Wavelength
(in nM)		 Typical Intensity
(in mcd at 10mA)
Red
1.7 2 3
5 10 30
9 20 90

660

9
Green
1.7 2 3
5 10 30
9 20 90

570

7
 

IE  BX  R/G

IE  BX  R/G
Pin Connection Pin Connection
1 A  Anode 11 J  Cathode
2 B  Anode 12 I  Cathode
3 C  Anode 13 H  Cathode
4 D  Anode 14 G  Cathode
5 E  Anode 15 F  Cathode
6 F  Anode 16 E  Cathode
7 G  Anode 17 D  Cathode
8 H  Anode 18 C  Cathode
9 I  Anode 19 B  Cathode
10 J  Anode 20 A  Cathode

     
1. For uniform brightness, equal current (10-20 mA) must be given for all segments with 2 volts supply. Choose appropriate resistor for uniform brightness ( R= { Vs - Vf } / IF) .
2. For cleaning, IP alcohol can be used but should not be in contact with the surface for more than 1 minute.
3. Do not bend the pins after soldering. If required, it may be done before soldering only.
4. Soldering rod should be kept away from the body of the display.